What we're going to do in this Part
Continuing on from last part, we're going to provision Windows (7/10/Server). There are two ways to do this, Wimaging by kireevco or a WDS Server. I am going to show you the WDS way since it integrates with MDT. Also Wimaging hasn't been updated in a while.
Table of Contents
- Part 1: Getting Started
- Part 2: Deploying Windows 7/10/Server
- Part 3: Deploying ESXi
- Part 4: Getting Started with Puppet
- Part 5: Advanced Puppet
Since this is a continuation of the previous part, the hostnames are going to be the same as last time.
Here's a quick list of things you need to follow this tutorial:
- a Windows Server ISO (I am using 2012R2 Datacenter here, but anything that has the ability to install WDS will work)
- an ISO of the Windows you want to install (I am using Windows 10 Pro x64 here, but it's pretty much the same with Windows 7/8/8.1)
- about 150 GB Free Space on your VM host for MDT and the provisioned Windows VM
- about 1-2 hours of your spare time
- (optional, but recommended) an existing Active Directory Domain. I am not going to be relying on this, but I'll highlight where the steps differ.
Enough rambling, let's get started with installing the WDS Server.
The VM doesn't need a lot of power. I set mine up with one vCPU, 4 GB of RAM and 2 Harddrives. I use the first harddrive for the Windows install and the second one for WDS/MDT. This should be enough for 99% of all environments, since it essentialy only serves as a TFTP/SMB Server.
Mount your Windows Server ISO and start the install. There's nothing special to do here, just format both drives, select the first one as installation target and lean back for 15-30 mins while it installs itself.
After we're done installing the OS, we're going to change the Hostname and a few other things. I am going to call my Server
war-dev-mdt01.beryju.org, but you can call it whatever you want to. Additionally I am going to assign it a static IP since it shouldn't have to rely on Foreman's DHCP Server. After having done that, reboot the Machine so the Hostname is applied. After the restart, you'd also join it to the domain if you have one. Now begins the actual installation of our WDS Server. Open the Server Manager and go to
Add Roles and Features and click next until you're presented with a list of roles to add. From that list we're going to select
Windows Deployment Services. Answer the popup with
Add Features since we want the Management tools as well.
The rest of the wizard can be left as-is, just make sure both
Deployment Server and
Transport Server are checked in the WDS install pane. After the installation is completed, you need to start the
Post-Installation Tasks, which creates a few necessary directories and files. If you have enabled Remote Management and you are joined to a domain, you can do the rest of this via the RSAT on your Desktop.
Now is also a good time to copy over the ISO of the OS we want to install. I created a seperate folder on the seconday drive named
Images, where I just create a subfolder for every ISO. Now you shoud copy all files off the ISO,
Now, before we can install MDT, we have to install ADK.
Windows Assessment and Deployment Kit (Windows ADK), formerly Windows Automated Installation Kit (Windows AIK or WAIK), is a collection of tools and technologies produced by Microsoft designed to help deploy Microsoft Windows operating system images to target computers or to a VHD (Virtual Hard Disk). It was first introduced with Windows Vista. Wikipedia
The ADK installer can be downloaded here. I'd reccomend to insatll it on the seconday disk as well. All you need for MDT to work is
Deployment Tools and
Windows Preinstallation Environment (Windows PE)
Onward to MDT. MDT is the actual Framework that allows you to customize Windows installations. We need this so we can:
- Automatically install Applications
- Automatically join the PC to the Domain (optional)
- and, most importantly, notify Foreman when the install is done.
As of July 2016 the latest version is 2013u2, which can be downloaded here. The installation of MDT itself is pretty easy: Next, Accept, Next, Next, Next, Done. Now we have access to the
Deployment Workbench, where we are going to spend the next chunk of our time.
To actually work with MDT, we have to create a Deployment Share. This Share holds all Data to install the OS, the PXE Boot Images, applications to install and more. I am going to use
D:\DeploymentShare as a Path for it. On the options page, tick all checkboxes so it asks as little as possible during install. Afterwards it should look like this if everything went right.
Next step is to actually add the OS. To do that, we're going to
Import Operating System on the right. Select
Full set of source files, navigate to the Directory of the ISO you copied earlier and continue on. The Import process is going to take a while, so lean back and relax for a few minutes.
After that is done, we're going to create our first Task Sequence. A Task Sequence defines what the Preinstallation System actually does, so things like format disk 0, clone the image to that partition and so on. The ID we choose is very important, since it has to match with the OS we're creating in Foreman. Go with
windows_10_0 so it matches with the later instructions. (I know the pictures show something different, but
windows_10_0 is correct.) The Template we're going to use is
Standard Client Task Sequence since we're going to install a desktop OS. If you want to provision Windows Server with this, you should use
Standard Server Task Sequence. Next select the OS you want to install. After that we can input a Windows Key, which I'd reccomend since it takes one manual step away from the install. The rest of the wizard should be self-explanatory.
This is the part where we actually integrate WDS/MDT with Foreman. The goals for this part are:
- Get the Windows Installer to tell Foreman when it's done
- Get the Windows Installer to ask Foreman for the PC's hostname
For that first point, I've found it's easiest to just have the installer execute a PowerShell script which calls Foreman. To enable PowerShell in the installer, we have to right click on the Deployment Share in our Deployment Workbench. Then we select the architecture on top to configure the correct boot image.
Since we're already here, we can also add the part that asks Foreman for the hostname. In the same window under the Rules tab, enter the following:
[Settings] Priority=Default, GetComputerName, GetTaskSequence [Default] OSInstall=YES SkipCapture=YES SkipAdminPassword=YES SkipProductKey=YES SkipComputerBackup=YES SkipBitLocker=YES SkipBDDWelcome=YES SkipUserData=YES SkipComputerBackup=YES SkipComputerName=YES SkipDomainMembership=YES SkipLocaleSelection=YES SkipSummary=YES SkipTimeZone=YES SkipTaskSequence=YES TimeZoneName=W. Europe Standard Time [GetComputerName] WebService=http://war-dev-puppet01.beryju.org/unattended/provision Method=GET OSDComputerName=string [GetTaskSequence] WebService=http://war-dev-puppet01.beryju.org/unattended/user_data Method=GET TaskSequenceID=string
(Quick note: if you're integrating this into an AD Domain, you should create a seperate user for this and not use the administrator account.) Obviously, the
Domain settings can be left out if you're not using an AD Domain. Click on the button
Edit Bootstrap.ini and add the lines
SkipBDDWelcome=YES UserID=administrator UserDomain=corp.beryju.org UserPassword=<password>
at the end. This wil skip the initial welcome screen and the network credentials. Confirm these settings with ok.
Now we have to create a small PowerShell Script, which basically tells Foreman that we're done with the base install and that it shouldn't PXE boot this machine again. This File needs to be accessible by the installer, so put it on the DeploymentShare Folder. (Mine is called Postinst.ps1) (Also make sure it's actually
.ps1 and not
$r = [System.Net.WebRequest]::Create("http://war-dev-puppet01.beryju.org/unattended/built") $resp = $r.GetResponse() $reqstream = $resp.GetResponseStream() $sr = new-object System.IO.StreamReader $reqstream $result = $sr.ReadToEnd() write-host $result
We also need to add a step to the Task Sequence, so the script is executed at the right point in the install. Open the Task Sequence Steps by right-clicking your Task Sequence, selecting Properties and navigating to the second tab.
Here you need to add a
Run a PowerShell Script Task by clicking on Add, General and
Run a PowerShell Script. Set the 'PowerShell script' field to the UNC Path of your PowerShell script.
Now we have to build the WIM Files, which can be done by right-clicking our
Deployment Share and selecting
Update Deployment Share. After this is done, we need to add the Boot and Install image to WDS itself. Go back to your
Windows Deployment Services Console. First, add the Boot Image by selecting
Boot Images on the left side, right-click on the blank and select
Add Boot Image.... The Path for the Boot image is
D:\DeploymentShare\Boot\LiteTouchPE_x64.wim. After that, add the Install Image by doing the same in the
Install Images Section. You have to create a Boot Image Group first though, which you can name whatever you want. The Path for the Install Image is
D:\DeploymentShare\Operating Systems\Windows 10 Pro x64\sources\install.wim.
We also have also have to disable listening on DHCP ports and the F12 Key Prompt. This is done in the Server Properties; under the
DHCP tab the first Checkbox and under the
Boot tab both policy selections to
Always continue the PXE boot. This is all we (should) have to do in Windows for now.
Now we also need to tell Foreman about our WDS Server. First, we have to manually create a DNS record for our WDS service, Execute
echo -e "server localhost\nupdate add war-dev-mdt01.beryju.org 86400 a 172.16.4.59\nsend" | nsupdate -D -k /etc/bind/rndc.key on your Foreman server after replacing
war-dev-mdt01.beryju.org with the FQDN of your WDS server and
172.16.4.59 with the IP of it. We also have to disable the requirement of SSL since MDT WebServices don't like unsigned HTTPS certs, so execute this
sed -i -e 's/:require_ssl: true/:require_ssl: false/g' /etc/foreman/settings.yaml && /etc/init.d/apache2 restart Afterward, we're going to create the Operating System in Foreman. To do that, open the Web interface and navigate to
Operating System and select
New Operating System. Then fill all fields in as shown in the next picture.
After that, we have to create all the templates needed for WDS. Navigate to
Provisioning Templates and click on
New Template. The name should be something like
WDS Provision, and the content is the follwoing:
<?xml version="1.0" encoding="utf-8"?> <string xmlns="http://beryju.org"><%= @host.shortname %></string>
Type tab, you need to select
provision as type, and on the
Associations tab click on Windows in the
All Items List. Create another template with the type
user_data and the same association, but the title
WDS user_data and the content
<?xml version="1.0" encoding="utf-8"?> <string><%= @host.operatingsystem.name %>_<%= @host.operatingsystem.major %>_<%= @host.operatingsystem.minor %></string>
After that, create another template with the name
WDS PXE Chain. This one is of the Type
PXELinux, and the content should be this
<%# kind: PXELinux name: WDS PXE Chain oses: - Windows 10, - Windows 8.1/Server 2012R2 %> <% if @host.pxe_build? %> default Windows label Windows kernel pxechn.c32 append 172.16.4.59::\boot\x64\wdsnbp.com -W <% end %>
You're going to need to change the IP in that snippet to the IP of your WDS Server. Afterwards, we also need to create an empty Partition Table since that's done by MDT. Go to
Partition Tables and create a new one. The name should be something like
WDS Default. Select
Windows as Operating System Family and paste some filler text like this:
<%# kind: ptable name: WDS default ptable oses: - Windows Server 2008 - Windows Server 2008 R2 - Windows Server 2012 - Windows Server 2012 R2 - Windows %>
Since Windows uses
x64 instead of
x86_64, we also have to generate a new Architecture. This is done in the
Architecture menu under
Hosts. Simply click on
New Architecture, enter
x64 as name and select Windows as the OS. Last we need to create an Installation Media. This is a Foreman requirement, but it's not actually used for anything. Make sure it looks similar to this
and you should be good. The you can go back to the Operating System List, select Windows and select all those templates as defaults. Now before you can actually deploy a Windows Machine, you need to download these files pxechn.c32 and libcom32.c32, and put it in
/srv/tftp on your Foreman machine. Without this file, your PXE Server wouldn't be able to forward anything to WDS. Now these files worked fine for me when I initially wrote this tutorial, but if those don't work just get the latest and move all of these files to the TFTP Root:
chain.c32, ldlinux.c32, libcom32.c32, libutil.c32, linux.c32, mboot.c32, menu.c32, pxechn.c32, pxelinux.0. Thanks to Ido Kaplan in the comments for the tip!
New Host and select the Windows OS on the
Operating System tab. If you did everything correctly, you should be able to just lean back and watch it install itself, as you can see here: (sped up 20x)